|
发表于 2021-9-30 16:49:51
|
显示全部楼层
Bios Settings(开机按 F1)
安装MacOS必须执行以下配置
In Security menu, set the following settings:
Security > Security Chip: must be Disabled,
Memory Protection > Execution Prevention: must be Enabled,
Virtualization > Intel Virtualization Technology: must be Disabled,
Internal Device Access > Bottom Cover Tamper Detection: must be Disabled,
Anti-Theft > Current Setting: must be Disabled,
Anti-Theft > Computrace > Current Setting: must be Disabled,
Secure Boot > Secure Boot: must be Disabled.
In Startup menu, set the following options:
UEFI/Legacy Boot: Both,
UEFI/Legacy Priority: UEFI First,
CSM Support: Yes.
保存配置后开机引导 F12
————————————————
版权声明:本文为CSDN博主「恒云客」的原创文章,遵循CC 4.0 BY-SA版权协议,转载请附上原文出处链接及本声明。
原文链接:https://blog.csdn.net/python2007cn/article/details/98759129 |
|